Search programme

​Use the search function to search amongst programmes at Chalmers. The study programme and the study programme syllabus relating to your studies are generally from the academic year you began your studies.

Syllabus for

Academic year
KKR073 - Computational fluid dynamics for engineers (CFD)
CFD för ingenjörer
Syllabus adopted 2021-02-16 by Head of Programme (or corresponding)
Owner: MPISC
7,5 Credits
Grading: TH - Pass with distinction (5), Pass with credit (4), Pass (3), Fail
Education cycle: Second-cycle
Major subject: Chemical Engineering

Teaching language: English
Application code: 25112
Open for exchange students: Yes
Block schedule: A+
Minimum participants: 12
Maximum participants: 80
Status, available places (updated regularly): Yes

Module   Credit distribution   Examination dates
Sp1 Sp2 Sp3 Sp4 Summer course No Sp
0116 Examination 4,0c Grading: TH   4,0c   09 Oct 2021 pm J  
0216 Project 3,5c Grading: UG   3,5c    

In programs



Ronnie Andersson

  Go to Course Homepage


General entry requirements for Master's level (second cycle)
Applicants enrolled in a programme at Chalmers where the course is included in the study programme are exempted from fulfilling the requirements above.

Specific entry requirements

English 6 (or by other approved means with the equivalent proficiency level)
Applicants enrolled in a programme at Chalmers where the course is included in the study programme are exempted from fulfilling the requirements above.

Course specific prerequisites

At least one basic course in transport phenomena
KAA060 Transport Phenomena in Chemical Engineering, 7.5 hec
MTF053 Fluid Mechanics, 7.5 hec
Or similar course.


The course gives an introduction into advanced modeling using Computational Fluid Dynamics (CFD), which has become a indispensible tool for many engineers. The focus is on modeling the interaction between convection, diffusion, heat conduction and chemical reactions for single phase and multiphase flows. The focus is to teach how to do CFD analysis correctly but not how to write your own CFD code. The student is given hands-on experience of drawing, meshing and simulation. One important objective is to give the students a critical attitude to both identify the possibilities and the limitations in advanced simulation programs. After completing the course the student will be able to select appropriate models and perform advanced simulations in accordance with best practice guidelines.

Learning outcomes (after completion of the course the student should be able to)

  • Understand basic principles of turbulence, mixing, fast reactions (combustion), multiphase flows and how these are related.
  • Understand the basics and limitations with the models used in CFD and select appropriate models for these systems.
  • Solve problems related to the systems above by selecting suitable models and numerical methods.
  • Provide the students with hands-on experience with a state of the art CFD program.
  • Critically evaluate simulation results and communicate the results in oral and written form.


The course presents the fundamental equations for momentum, mass and heat balances and shows how these models are solved in commercial codes. The standard numerical methods are presented and their reliability is discussed. Elementary Computer Aided Design (CAD) and meshing are introduced. The properties of turbulent flows and how they are modeled by k-e, Reynolds stress and LES are described. Multiphase flows are very common in chemical engineering and the Euler-Lagrange, Mixture (Algebraic Stress), Euler-Euler and the Volume of Fluid (VOF) models are presented. Models for mixing and fast reactions in turbulent flows are described. CFD has both possibilities and limitations and the concepts of verification and validation are discussed. The tutorials give an introduction of how to formulate a CFD problem and set up and solve the problems in a commercial code.
The tutorials cover flow and reactions inside a porous catalyst, combustion in non-premixed flow and multiphase simulation of evaporation spray.
The project deals with the design of an industrial-scale selective catalytic reduction system and allows the student to explore various design improvements and apply best practice guidelines in the CFD simulations. Here the concept of virtual prototyping is introduced and the students can test different designs to find an optimal design.


The course includes lectures, and 3 tutorials and one project. A commercial CFD program will be used in the course. The aim of the computer-based design project is to provide students with the opportunity of the practicing problem-formulation and problem-solving through the use of an advanced CFD program. A written report from each of the tutorials and the project that should contain a critical discussion of the models used in the simulation and an assessment of the reliability of the simulation.


B. Andersson, R. Andersson, L. Håkansson, M. Mortensen, R. Sudiyo, B. van Wachem, Computational Fluid Dynamics for Engineers, Chalmers edition (sold at Cremona approximately 180 SEK).

or B. Andersson, R. Andersson, L. Håkansson, M. Mortensen, R. Sudiyo, B. van Wachem, 2011, Computational Fluid Dynamics for Engineers, IBSN 978-1107018952, Cambridge University Press. (hardcover sold at Amazon approximately 92 USD).

Examination including compulsory elements

A written examination after about 4 weeks. The grades pass/fail are based on the written examination and written and oral reports from the tutorials and the project. Higher grades require also an extended project report and an oral examination.

The course examiner may assess individual students in other ways than what is stated above if there are special reasons for doing so, for example if a student has a decision from Chalmers on educational support due to disability.

Page manager Published: Mon 28 Nov 2016.